English
中文NEWS
Suzhou Daojian Precision Technology Co., Ltd
手 机：13862585656
Q Q ：591744233
邮 箱：Protool_0@126.com
Replacement of oil for ultra-high pressure electric pump
inputtime：2024-09-17hits：order
As is well known, oil is the power source of ultra-high pressure electric pumps. Therefore, caution must be exercised in the use of oil. The ultra-high pressure electric pump oil pump requires the use of No. 20 engine oil. The oil storage capacity must be above the oil window range. Too little or too much oil can affect usage. Every time the ultra-high pressure electric pump is refueled or changed, it must be filtered with an 80 mesh or more oil filter to remove any impurities in the oil, in order to achieve better lubrication effect. It is best to install an oil filter, usually with a particle size of 10 μ The impact of pollutants below m on the pump is not very significant, but greater than 10 μ m. Especially at 40 μ Above m has a significant impact on the service life of the pump. Therefore, it is necessary to install an oil filter to prevent any impact on other components
When changing the oil, it is necessary to clean the fuel tank. This is also a maintenance method for ultra-high pressure electric pumps. The general oil change period for ultra-high pressure electric pumps is six months. Time should not be too long. When operating an ultra-high pressure electric pump, it is important to note that the operating oil temperature is between 10 degrees Celsius and 50 degrees Celsius.
Previous article：The main components and functions of hydraulic electric pumps
Next article：Composition and classification of electric hydraulic pliers